Frequency chart for Antminer S1

[K2]

Below is a frequency chart list for over/under clocking your Antminer S1 - 350 is the stock freq value, which is uncommented out should you need to copy/paste this into your config to put your S1 back to normal speed. To change the frequency speed of your S1, ssh into it and edit /etc/config/asic-freq

Code: Select all

#option 'freq_value'   '4f81'   #400M
#option 'chip_freq'   '400'
#option 'timeout'   '35'

#option 'freq_value'   '5f05'   #393.75M
#option 'chip_freq'   '393.75'
#option 'timeout'   '36'

#option 'freq_value'   '5e82'   #387M
#option 'chip_freq'   '387'
#option 'timeout'   '37'

#option 'freq_value'   '4e81'   #375M
#option 'chip_freq'   '375'
#option 'timeout'   '38'

option 'freq_value'   '4d81'   #350M
option 'chip_freq'   '350'
option 'timeout'   '40'

#option 'freq_value'   '4c81'   #325M
#option 'chip_freq'   '325'
#option 'timeout'   '45'

#option 'freq_value'   '0b81'   #300M
#option 'chip_freq'   '300'
#option 'timeout'   '50'

#option 'freq_value'   '0981'   #250M
#option 'chip_freq'   '250'
#option 'timeout'   '55'

#option 'freq_value'   '0781'   #200M
#option 'chip_freq'   '200'
#option 'timeout'   '70'

#option 'freq_value'   '4f02'   #193M
#option 'chip_freq'   '193'
#option 'timeout'   '75'



I pulled this chart from this thread - https://bitcointalk.org/index.php?topic=589429.0